Frequently Asked Questions
Diagnostic Mold FAQs
We all like to think that we can figure this stuff out on our own. From our experience, we find many of our clients know enough to be dangerous. This isn’t like changing the air filter in your furnace. You are dealing with an organism that is secretive, potentially harmful to your health and actually can fight back! If you can relate to two (2) or more of the following items, it’s time to contact a local mold professional and get the answers you are looking for.
Does Mold Have You Worried?
Moisture
First, was the moisture intrusion source(s) corrected? If moisture is under control, a Clearance Test should be performed, which is a combination of factors that include a visual inspection, review of remediation protocol, sampling, etc. Only then can you get a good idea if the area was properly brought back to normal fungal ecology.
Very! Moisture drives all biological processes in a built environment, and the way moisture moves through a home can help explain what is going on. Take older / historic homes, and the moisture issues can be very complex.
Not as much as you think. Depending on the scope of work and if demolition is involved, it can be affordable if you catch the issue early enough. But long-going prolonged moisture issues almost always cost more than you would think.
Mold is a product of hydrology, humidity, and moisture. Was the source of water that caused the mold addressed as part of your remediation? We know that mold and water go hand in hand. If your environment’s hydrology is not managed correctly, the mold will return. We have Certified Hydrologists on staff to ensure that the water source is appropriately addressed to ensure any future mold growth is mitigated.
Many times moisture makes its way into the wall cavity and stimulates molds to grow. Given time they will start to “Bleed Through” the outside wall and at first look like a small dark area. If the moisture source is not obvious, further investigation by a pro is recommended.
Cleaning mold often does not address what is causing the mold to grow in the first place. And that’s what we call the “Moisture Trigger.” While we often think of moisture as a “puddle,” in this case, molds don’t like puddles, they like elevated humidity, which is hard to detect on your own. Better call a mold pro.
From $35/LF to $75/LF depending on site conditions, mechanics and access.
The deeper you go, the more expensive it gets. But generally speaking, keeping top of French drain 6 inches below grade is often adequate.
To dewater wet areas of your yard or to move water away from your basement to prevent flooding.
Before installing a French Drain, it's always a good idea to know the depth of the water table, the depth to the seasonal high water table, the soil type. Topography (pitch) of the yard area and where to discharge the water too.
The best way to unclog a French Drain is with high-pressure water. Shoot it in on the cleanout end and watch debris flow out. If it doesn't work, you may need a "snake" to break up the clog. Corrugated pipe is difficult as debris gets trapped very easily.
French Drains are installed by digging a trench deep enough to bury your pipe at least 4 inches below grade. The slope of the trench should be 2% (or 1/4 inch per foot) to move solids that collect in the pipe. You will want a clean-out and good area to discharge to, along with good draining material to pack in around your pipe so water can get into the pipe easily.
In isolated rooms like bedrooms, the best way to control moisture is by improving ventilation. For example, installing passive air vents in the walls or doors is often all you need if a bathroom is attached with an exhaust fan; setting the fan on time to autorun works well.
Simply sink a large, sturdy plastic bucket in the ground that has a lot of small 1/2 inch holes in it. Pack the area around the bucket with gravel and line the area to keep fine dirt out. Water will collect in the bucket where a mechanical pump will sit. As the water level rises, the pump will engage and remove the water. The bigger the bucket, the less your pump has to engage, thus extending the life of your pump.
Odor
Many folks have (or develop) sensitivity to molds and chemicals that are immediately noticeable. Other times it takes longer as we age, and our immune systems start to decline. Everyone is different. But when one room in your home gives you such immediate discomfort, there is almost always a hidden microorganism to blame. Better bring in a mold specialist.
Actively growing molds have a distinctive musty aroma associated with their life cycle. Picture walking into a basement and what aroma is typically associated with that environment. If you smell smoke, there’s almost always fire. A pro would help you determine what is going on with that aroma.
It’s not unusual to have become so de-sensitized to the aromas associated with your home after living there for decades. Many times folks new to your home will notice the unusual aroma and mention it to you. You should hire a professional and investigate this further as things are not as they always seem to you.
The best way to remove odors is to remove the source. But odors are often absorbed by surrounding building materials and can be difficult to address. To address those areas can use a deodorizing treatment such as a biocide, hydroxylation, ozone, etc. It just depends on the type of odor and how long it has been around.
A musty smell is often a sign of a larger moisture challenge. Manage the moisture, and the odor often dissipates as well.
Mold
Remodeled homes often wind up concealing a lot of the clues we look for when we assess for mold, making the issues often difficult to find. Take for instance, an older 1940's home recently renovated where the attic was converted to a master bedroom (now we can't see the underside of the roof), and the rear porch was enclosed (has an inaccessible crawl space and enclosed cathedral ceiling with failing ridge vent). More time and some invasive investigating / sampling are often necessary.
Scrubbing molded areas with a detergent and water and then drying the area thoroughly often works for small areas of mold. Using bleach is not recommended as it may cause more harm than good. But there are instances where using a Biocide may be called for.
Many folks have (or develop) sensitivity to molds and chemicals that are immediately noticeable. Other times it takes longer as we age, and our immune systems start to decline. Everyone is different. But when one room in your home gives you such immediate discomfort, there is almost always a hidden microorganism to blame. Better bring in a mold specialist.
First, was the moisture intrusion source(s) corrected? If moisture is under control, a Clearance Test should be performed, which is a combination of factors that include a visual inspection, review of remediation protocol, sampling, etc. Only then can you get a good idea if the area was properly brought back to normal fungal ecology.
Simple cleanses and spot remediation can be completed in a few hours, where more elaborate remediations and restoration might take weeks. It depends on the impacts on the home and the occupants.
Mold is a product of hydrology, humidity, and moisture. Was the source of water that caused the mold addressed as part of your remediation? We know that mold and water go hand in hand. If your environment’s hydrology is not managed correctly, the mold will return. We have Certified Hydrologists on staff to ensure that the water source is appropriately addressed to ensure any future mold growth is mitigated.
Many times moisture makes its way into the wall cavity and stimulates molds to grow. Given time they will start to “Bleed Through” the outside wall and at first look like a small dark area. If the moisture source is not obvious, further investigation by a pro is recommended.
Actively growing molds have a distinctive musty aroma associated with their life cycle. Picture walking into a basement and what aroma is typically associated with that environment. If you smell smoke, there’s almost always fire. A pro would help you determine what is going on with that aroma.
It depends. It’s been our experience that if you are planning on selling your home in the near future, yes! Mold is on everyone’s mind these days, and knowing if you have a mold issue can only be determined by a mold test. If negative, the test can be used to assure prospective buyers that there is no mold to worry about.
Yes! Mold is a natural part of our environment where we like to see normal fungal ecology. But so are bears, ticks, and poison ivy. You wouldn’t want to see any of them in your house now, would you? The same goes for mold, and there are some that we don’t want to see in our homes at any level due to the potential health risks.
Molds and the byproducts of their life cycle (gases known as mycotoxins, odors & mold spores) are often airborne throughout the home. Materials (like clothing) are porous and absorbent and tend to collect (and concentrate) these items that often have a very distinct aroma. You might not be aware of it, as we tend to become desensitized to the aroma the closer we are to it. By your family and friends will smell it. Better call a mold pro.
There are many allergy-like symptoms (like sore throats, sneezing, itchy/watery eyes, sinus infections, headaches) that also come from mold exposure. So ask yourself, when you leave the suspect area, do your symptoms get better? If so, some air tests to identify possible mold contamination would be a good idea.
Our nasal cavity and sinus chambers are our primary line of defense in conditioning air as it enters our bodies. Persistent sinus infections are often tied to a hidden environmental stressor that re-exposure to has detrimental health effects. Address the issue before it spreads beyond your sinuses.
We often hear terms like “winter allergy,” “seasonal allergy,” “winter asthma,” and “overactive sinus” when discussing seasonal allergies. What most folks don’t realize is that fungi thrive when plants thrive where their spores mix with other airborne particulates like pollen, dust, etc. It’s easy to think it’s seasonal because it’s so apparent. But from our experience, mold spores are most likely to blame when the term “seasonal allergy” starts getting thrown around.
It’s always a good idea to be well informed going into your home’s sale. Having an inspection done yourself is a good way to pinpoint potential issues and be prepared for buyers' concerns.
Cleaning mold often does not address what is causing the mold to grow in the first place. And that’s what we call the “Moisture Trigger.” While we often think of moisture as a “puddle,” in this case, molds don’t like puddles, and they like elevated humidity, which is hard to detect on your own. Better call a mold pro.
We all have had those stubborn leaks. They tend to show up only when the rain hits the house a certain way, then presto – a puddle or damp spot in the wall. Molds are uniquely adapted to exploit these intermittent micro-climates. Before the mold issue becomes intolerable, better call a mold pro.
Mold growth of this nature is often tied to elevated humidity and poor ventilation in your closet. If you frequently exercise, putting your sneakers away damp could be the culprit.
The term “Black Mold” or “Toxic Black Mold” has been attributed to a dark/black mold (called Stachybotrys) that has been demonized in the media as a result of some very well-known lawsuits. While Stachybotrys is known to produce “mycotoxins” that can adversely affect human health, it does not fair to say it is toxic.
While the State of New Jersey does not require any specific certifications, anyone you work with should have an NJHICL & proper general liability insurance. There are numerous mold certification firms that offer training; any contractor you work with should have mold training and participate in ongoing continuing education.
Many times, areas less than 10 square feet can be cleaned by an individual. If it’s more involved than that, it’s best to get a quote from a mold pro who follows EPA guidelines. Access challenged spaces to work well with dry ice treatments where easily accessible basements respond well to traditional “rubbing and scrubbing.” Your particular space will dictate what is best.
We are all going to die (eventually). But there are no known documented death’s from mold toxicity that we are aware of. But the young, old, and immuno-compromised individuals are more susceptible to mold-related illnesses.
Who did the test? If you used one of those over-the-counter tests, they recommend that you need a mold professional to interpret the results. Any mold pro should be able to tell you about the molds detected and the water trigger, but you might need to do an additional control test to see if your molds are beyond Normal Fungal Ecology and pose a health risk.
Just give us a call, and we can help with the numbers. Of course, it's best to have a formal mold assessment/inspection done first delineating mold impacts. But if it appears to be a small issue, we can usually figure it out pretty quickly. There's no fee to prepare a quote if you own your home. For Home Buyers, we have a small fee that we credit back when you engage us.
Rust-colored mold on your walls might not be mold at all. There is a type of micro-organism called Iron Bacteria that often gives a rust-colored mold.
Not really. While sometimes, you can have a good idea if a piece of pipe wrap is asbestos or if a spot on that wall is mold. But all of these items are microscopic and require some degree of testing to identify what they are.
A Basic Mold Sampling package including 3 samples is $725. A thorough assessment, including inspection and sampling (LMI), can cost on average $895 plus mobilization fees.
A certified and experienced firm well versed in moisture management and mold remediation. The best inspectors are well experienced in mold remediation and know where the mold hides.
Mold inspection is often not necessary. If family members are healthy and there are no visible signs of mold growth, then a mold inspection isn't really necessary. But most folks often can't distinguish between mold-based health issues and often can't visually spot mold growth. In those cases, it's a good idea to have a mold inspection to be safe.
Most definitely. But a basic mold inspection isn't adequate. When you consider the house has been prepared for sale with fresh paint, repairs, and a top-to-bottom cleansing, you will need an expert who knows how to find "hidden molds" that often go undetected by basic mold inspections.
It depends on a few factors like access, basement vs. attic, finished areas vs. non-finished areas, and organisms type (toxic vs. non-toxic. So looks at a range of from $5.00/SF to as much as $25.00/SF (or more).
Black mold tends to grow in patchy / clumped areas. The best way to remove it is to dispose of the removable items or cut out that area of the wallboard. Smaller areas less than 5 SF and no health issues to worry about are often easily addressed this way.
They are used interchangeably where a Remediation is the removal of molds back to Normal Fungal Ecology. You can't get rid of mold 100%.
Normally no.
Mold is a fungus that grows on plants and fibers wherever it can get what it needs- moisture. It travels in spores, feeding and living off of moisture and dampness. Mold can grow just about anywhere in your home where there is enough moisture, your bathroom or kitchen is the perfect place for mold to inhabit.
Mold is caused by large amounts of moisture in fibers or the air. For example, any leak left untreated in your wall or any flooded carpet that is not properly dried could cause mold to grow.
By performing routine checks of your home, especially rooms with a lot of water pipes, for leaks you’re already halfway to preventing water damage. Also make sure to check your attic spaces, basement, and outside the home on a yearly basis for leaks as well.
- Make sure you replace mildewy shower curtains
- Clean out air conditioning, heating, and ventilation drip pans
- Keep fabrics and other clothes dry
- Open windows and doors to promote air circulation, especially while cooking or taking a shower
- Let the sunlight and fresh air help kill mold
- Clean up any spills straight away. Watch for condensation and wet spots. Fix source(s) of moisture problems ASAP
- Address any plumbing issues and fix any leaks
- Invest in a dehumidifier for damp areas around the home
You should be able to smell, see, or feel mold. Sporadic, uncommon allergy symptoms could be one sign of mold. Mold has a very distinguishable musty smell, which should be the strongest right at the source. If your hallway smells musty all the time and you don’t know why you may want to call a specialist.
Very short exposure to mold is pretty much harmless besides some mild allergy-like irritation. Eventually, mold exposure can lead to more serious health problems like bleeding in the lungs, so immediate attention to mold cleanup is essential.
Allergy-like symptoms are the first sign of a sickness caused by mold. Sneezing, coughing, and itchy eyes are all recognizable this way. Also, people with asthma will be much more prone to asthma attacks when around dangerous mold spores for too long.
By performing routine checks of your home, especially rooms with a lot of water pipes, for leaks, you’re already halfway to preventing water damage. Also, make sure to check your attic spaces, basement, and outside the home on a yearly basis for leaks as well.
• Make sure you replace mildewy shower curtains
• Clean out air conditioning, heating, and ventilation drip pans
• Keep fabrics and other clothes dry
• Open windows and doors to promote air circulation, especially while cooking or taking a shower
• Let the sunlight and fresh air help kill mold
• Clean up any spills straight away. Watch for condensation and wet spots. Fix source(s) of moisture problems ASAP
• Address any plumbing issues and fix any leaks
• Invest in a dehumidifier for damp areas around the home Very short exposure to mold is pretty much harmless besides some mild allergy-like irritation. Eventually, mold exposure can lead to more serious health problems like bleeding in the lungs, so immediate attention to mold cleanup is essential.
First, check for leaks in the roof and ensure that there is proper ventilation and air circulation. Mold growth is stimulated by unmanaged moisture, so this will help you locate the source of the issue. Scrubbing molded areas with a detergent and water and then drying the area thoroughly often works for small areas of mold, and there are instances where using a Biocide may be called for. If the moisture source is not obvious and/or the area is larger than 10 square feet, further investigation by a pro is recommended.
Air Quality
Many times we can't put our finger on exactly what is causing our ill health. But we come to realize that we actually "Feel Better" when we leave our homes for any length of time. This is often the case when hidden biological issues are degrading the home's overall air quality. An environmental air quality professional will be needed.
It’s not unusual to have become so de-sensitized to the aromas associated with your home after living there for decades. Many times folks new to your home will notice the unusual aroma and mention it to you. You should hire a professional and investigate this further as things are not as they always seem to you.
Our nasal cavity and sinus chambers are our primary line of defense in conditioning air as it enters our bodies. Persistent sinus infections are often tied to a hidden environmental stressor that re-exposure to has detrimental health effects. Address the issue before it spreads beyond your sinuses.
There is no one air quality test to cover it all. If it's a newer home, we will lean towards a chemical test for VOCs. If it is an older home with a musty aroma, we will test for biologicals.
The best ways to improve Indoor Air Quality (IAQ) are improving ventilation, air filtration, using low VOC paints and materials, and managing moisture levels.
Humidex
The gentle draw of air uses minimal energy and never stops. It affords the space to turn over indoor air several times a day.
Less than you think. Garage units run a few hundred dollars installed where complicated crawl space units with accessory fans and dedicated outlets installed run around $2,500. The basement and patio units run somewhere in between.
The cooler moisture-laden air is dense and hovers on the floor of the basement. The Humidex draws that air in and expels it outside the home. The void left behind fills with conditioned replacement air from upstairs, pushing the rest of the bad air towards the ventilator, eventually replacing all the air in the basement.
Of course. But if you can wipe the grill cover off at the bottom of the unit and make sure the vent cover outside stays free of debris once or twice a year, you can handle it.
Season changes in humidity are common, where summertime is the most humid. As we slide into winter, ambient humidity levels start to drop, and Humidex responds by sensing the change and sliding into maintenance mode. You even have a "Summer and Winter" setting that you can use to maximize the devices' efforts.
Within a couple of days, you should notice less odors and things starting to dry out. Most folks tell us that within 1-2 weeks, the air quality in the space is totally transformed. Of course, every space adjusts differently. But if you have corrected the source of the water intrusion, overall air quality improves very quickly.
Yes. Ventilation is a key component of any central Heating and Cooling system. Unfortunately, ventilation often isn't addressed as adequately. We have found that ventilating the basement not only improves IAQ in the basement but improves it for the entire home by breaking the "Stack Effect." As air warms up, it rises, which inevitably pulls air up from the crawl space and the basement. As the air cools, it falls, creating a tight circuit. By ventilating the basement, you actually "break the stack effect" and only circulate good conditioned air.
Yes, garages are often non-conditioned spaces full of all sorts of paints, thinners, gasoline cans, car exhaust, etc. Venting these VOC's out of the home keep them from migrating into the home and benefit greatly from being ventilated.
Many times the air in rooms that are not used a lot tends to stagnate. To help keep air circulating, think of changing the door to a "slotted door" or by adding "passive air vents" in the wall to allow for air to turn over easier.
Buildings often off-gas Volatile Organic Compounds (VOCs) tied to the types of building materials. Experts like the EPA agree that building air is some of the most polluted air we breathe. Ventilation helps dilute these VOCs and allows for fresh oxygenated air to be brought in to replace the air that has been depleted by the building occupants. We all need a good supply of clean, fresh air to survive.
Yes, there is a 5-year warranty on the parts.
We have had folks report their Humidex devices last 10, 20, and even 30 years before having any issues. Individual results vary, but you will be excited to hear they last a good long time.
No. Your Humidex is considered a "capital improvement" here in NJ. Just make sure you fill out the ST-8 form your installer should provide you to keep everything on the up-and-up.
EZ Breathe Home Ventilation System
Ventilation is often overlooked during house builds and remodels, but as science evolves, we realize just how important clean air is to our health and home. Using a proper ventilation system keeps your family safe from contaminants and illnesses. Additionally, you’ll improve your energy efficiency and reduce indoor air pollution.
According to the FDA, ignoring your home’s ventilation can lead to:
- The spread of influenza
- Asthma symptoms
- Viral infections
- Allergies
- And potentially some kinds of cancer
Poor ventilation also causes your home to deteriorate faster, which can have negative financial effects and impact your resale value later on.
Think of dehumidifiers and air purifiers as “spot treatments.” If you really want to dehumidify your whole house, you would need to place one in each room. An E•Z Breathe® unit, on the other hand, works on the entire home with the power of seven average dehumidifiers and purifiers.
Furthermore, E•Z Breathe® systems require far less electricity than running multiple dehumidifiers or purifiers. You’ll care for the entire building with just one unit and save money on your utility bills.
Because E•Z Breathe® systems use less electricity (usually about 40 watts a month), they are relatively inexpensive to maintain. Most homeowners pay less than $4 a month to operate with no regular maintenance requirements.
The short answer is that you can run your unit all year. The fan inside your E•Z Breathe® System is controlled by a humidistat that indicates whenever the humidity levels are too high. The fan automatically adjusts itself to ensure you maintain the proper humidity levels, stopping as soon as that is achieved.
Dehumidifiers often require you to dump the buckets of water pulled from the environment, but that’s not how the E•Z Breathe® works. It doesn’t condense the water but instead removes it and replaces it with clean, dry air.
If you are already using a dehumidifier to keep your home safe, you might find that using the E•Z Breathe® will actually lower your energy expenses comparatively. Additionally, the unit pulls from the lowest part of your home (the basement or crawlspace). This air is easier to heat and/or cool, which can save you money.
Your E•Z Breathe® unit will be placed at the lowest level of your home on an exterior wall. It isn’t loud, which means we can install it next to any room without causing discomfort.
SteraMist
SteraMist uses Binary Ionization Technology (BIT) - a patented two-step process that activates and ionizes a 7.8% Hydrogen Peroxide (H2O2) solution through a Cold Plasma Arc. This creates a fog called Ionized Hydrogen Peroxide (iHP). It contains a high concentration of Reactive Oxygen Species (ROS) consisting mostly of hydroxyl radicals (-OH). These hydroxyl radicals damage pathogenic organisms through cellular disruption and/or dysfunction.
The shielding agent of the SteraMist treatment is a probiotic coating made up of beneficial or “friendly” microbial organisms. The fogger then disperses these organisms to create an invisible coat that eats away at the biofilm of dangerous contaminants, then later eats the contaminants themselves. This is a process known as “competitive exclusion,” – which creates an environment of good bacteria fighting off bad bacteria.
After using the SteraMist Environment System, we deem rooms to be safe for re-entrance within a matter of minutes. An entire room can be effectively cleaned and treated in under 45 minutes. That includes both application time and contact time.
SteraMist uses no toxic byproducts and is thoroughly tested and approved by the EPA. It leaves no dangerous residue behind and requires less than an hour to work fully.
GreenWorks clients have used SteraMist to combat an array of pathogens, including C. difficile, MRSA, Influenza (flu), norovirus, salmonella, mold spores, and many others. It’s also been proven effective at battling COVID-19, something most of our clients are extremely concerned about right now.
No - SteraMist cleaning does not harm high-touch sensitive equipment or electronics. That means it is safe to use in hospitals, offices, schools, and other areas full of electronic devices.
SteraMist actually deodorizes the area by killing odor-causing bacteria. It will not leave behind any foul-smelling or harmful odors.
Six-Log kills 99.9999% of all microorganisms.
Asbestos
Asbestos is a naturally occurring, fibrous mineral that can only be identified under a microscope. Asbestos is found in the ground and is mined all over the world. In the past, asbestos was added to different products as insulation and for fire resistance. When asbestos fibers are taken into the body, they can cause ailments like mesothelioma and other problems. Extended exposure to asbestos is usually needed to develop into a serious problem. Asbestos is the most dangerous when it is airborne. The lightness of the asbestos fibers allows them to stay airborne for long periods and travel a far distance. There are professional abatement services that will remove asbestos if you need to have it removed from your home or workplace. Attempting to remove the asbestos without professionals is not safe and should not be considered.
The Home Inspection process often does not address asbestos. You have to be a licensed asbestos building inspector to perform this type of work.
It depends on the type of property. Residential homes are $695 + $Hrly Rate after 2 hrs + cost of samples, where larger commercial buildings start at $1,800.
Depending on the extent and location of the infestation and the potential health risks, it's often advisable to stay away while the work is being performed.
Asbestos is found in more than 3,000 products that are in use today. To make sure your products do not contain asbestos, you can call the manufacturer. A list of products that may contain asbestos include:-
• pipe and duct insulation
• building insulation
• carpet underlays
• roofing materials
• wall and ceiling panels
• artificial fireplaces and materials
• toasters and other household appliances
• furnaces and other furnace door gaskets
• patching and spackling compounds
• electrical wires
• textured paints
• brake pads and linings
• potholders and ironing board pads
• hair dryers
• floor tiles
• cement
NOBs include building materials such as floor tile, linoleum, mastics, caulks/sealants, adhesives, and roofing materials where the asbestos fibers are tightly bound in an asphalt or vinyl matrix. These building materials are non-friable, not usually significantly damaged, and do not represent an asbestos hazard to building occupants when not disturbed by renovation or demolition. Their significance is that NOB materials can still be prevalent in large quantities in buildings that have undergone active asbestos abatement and/or ACM management by an Asbestos Operations and Maintenance (O&M) Plan.
NOBs usually contain small asbestos fibers (both in length and size), and fibers may not be detected by Polarized Light Microscopy (PLM) (i.e., the OSHA reference method for asbestos bulk sample analysis). Studies continue to demonstrate PLM analysis of NOBs does not provide consistently reliable results (false negatives occur). As a result, NOBs are listed as a restriction/limitation in every asbestos survey when only PLM analysis is performed.
TEM re-analysis of NOBs is the standard of care that should be implemented to remove the restriction/limitation detailed in asbestos surveys. TEM uses 10,000x magnification (compared to 400x magnification for PLM) and can detect and identify even the smallest asbestos fibers. TEM re-analysis of NOBs demonstrating negative asbestos content by PLM is not mandated by the EPA, AHERA, OSHA, and most state asbestos regulations. However, TEM analysis of NOBs is mandatory by regulation in the states of NY, NJ, ME, and SC.
According to the EPA website (www.epa.gov/asbestos/pubs/verm.html) all vermiculite should be assumed positive. Vermiculite insulation can be found in:
- Attics
- Block Walls
- 2x4 Wood Framing Walls
Over the years asbestos labs and on-site inspectors have tested vermiculite insulation as negative for asbestos. On-site inspectors have used inadequate sampling methods and labs have different analytical procedures resulting in false negatives. This has caused the EPA to recommend all vermiculite be assumed positive.
Know the restrictions and limitations of your asbestos building surveys. Have your asbestos consultant include, as an extra cost line item, TEM re-analysis of representative NOB samples. Verify by TEM the negative asbestos content of NOBs from past surveys prior to initiating renovation/demolition operations in your facilities.
Air Purifiers Installation And Repair
Yes, whole-house air purifiers are an excellent choice if you want to protect every room in the building. These are typically installed in the return air duct of your furnace, where they run continuously. Installation must be conducted by a professional due to the level of HVAC work required.
Whole-house air purifiers are revolutionary machines that use DFS filtration technology to circulate air that’s free of contaminants. Their placement in your HVAC system allows them to waste less energy and decrease pressure levels.
We typically recommend installing individual air purifiers near windows or doorways - areas that experience more airflow. This allows them to prevent dust, mold, and other pollutants from being distributed through the rest of the house.
If you install a whole-house purification system, the unit will be installed in your HVAC system’s air duct.
There are very few downsides to installing an air purifier. The only things to keep in mind are:
- The need for occasional maintenance and repairs.
- Regular air purifier filter changes.
- Potential noise (although most are fairly quiet).
- Inability to leave windows open while the purifier runs.
Additionally, we encourage our clients to remember that air purifiers do not solve all indoor air quality problems, nor do they remove some potent odors. You’ll need to look into other solutions for those concerns.
Absolutely. Air purifiers are excellent at reducing the amount of household dust in circulation. This reduces your need to clean surfaces and can improve residents’ health and wellness significantly.
A standard air purifier can clean the air in a room within 45 minutes to 3 hours, depending on the size of the space and the purifier’s power settings and filters.
Most people are surprised to learn that air purifiers are actually quite energy-friendly. A standard-sized purifier consumes an average of 50 watts of electricity when run for 12 hours a day. In most areas of New Jersey, that would likely cost less than $2 per month.
We generally recommend running your purifier continuously. This is the most effective way to combat pollutants and keep clean air flowing throughout the building.
Yes - when installed and used properly, air purifiers can help reduce airborne contaminants in your home, including many circulating viruses.
Installing a whole-house air purifier can cost between $500 and $2,000 depending on the unit’s features and your local installation service prices.
Although this might seem expensive, the price of purifying your home’s air can pale in comparison to the cost of medical treatment for related respiratory and allergy problems. You can’t put a price on peace of mind, especially when it comes to your safety and home comfort.
Drainage System
Very! Moisture drives all biological processes in a built environment, and the way moisture moves through a home can help explain what is going on. Take older / historic homes, and the moisture issues can be very complex.
Simply sink a large, sturdy plastic bucket in the ground that has a lot of small 1/2 inch holes in it. Pack the area around the bucket with gravel and line the area to keep fine dirt out. Water will collect in the bucket where a mechanical pump will sit. As the water level rises, the pump will engage and remove the water. The bigger the bucket, the less your pump has to engage, thus extending the life of your pump.
From $35/LF to $75/LF depending on site conditions, mechanics and access.
Poor yard drainage isn’t just unsightly - it can cause a range of minor and major issues.
You may notice small issues right away, such as dead grass and standing puddles. However, the moisture can also lead to water-saturated soils that kill your turf grass and cause trees to suffer from root rot. The increased moisture compromises the soil oxygen levels, which harms plant life.
Furthermore, moss and mold, mildew, and wood rot thrive in moist environments. While your plants may start to die, increasing moisture can help fungus thrive. The last thing you want is to have these spores compromise your home’s outdoor and indoor air quality.
Within 24 to 48 hours of landing on a moist surface, mold spores begin to multiply. If you’ve noticed any mold or mildew growth in your yard, you need to act quickly to prevent the problem from escalating.
Mold isn’t the only organism that loves moisture - so do mosquitos. Standing puddles can quickly lead to an increase in mosquito activity, which can result in annoying bites as well as the spread of diseases such as:
- West Nile virus
- Eastern equine encephalitis
- Western equine encephalitis
- La Crosse encephalitis
- Dengue
- Yellow fever
- Zika
Although outbreaks of such diseases are rare in New Jersey, they have occurred in some U.S. states. It’s best to tackle standing water issues in your yard immediately, likely by installing an NDS drainage system.
One of the most common questions we receive is, “How do I calculate the water volume I need to manage?”
It’s certainly one of the most important aspects of installing an NDS drainage system. Fortunately, our NDS-certified contractors are here to do the calculations for you. We’ll size up your system and accurately calculate stormwater runoff. That way, you can pick the perfect system and solution for your yard’s needs.
Underestimating runoff water flow can be dangerous. The more runoff water flows over your hard surfaces, the more harmful pollutants it can pick up. These pollutants can include anything from trash to soap and dirt and pesticides, fertilizers, and bacteria.
To keep our yards and waterways safe, you need to understand and deal with your water flow fully. Talk to our environmental team today to calculate potential stormwater runoff and eliminate risk factors, such as flooding and pollutants.
We’re a family-owned Environmental Advisory and Environmental Construction firm, and we’re experts in identifying environmental problems - including outdoor moisture issues.
Furthermore, we’re experienced at providing cost-effective, powerful solutions to residents throughout New Jersey. We know how to handle local water sources and drainage system requirements.
As an NDS Certified PDC, we have access to the top high-quality drainage tools. So whether the problem is in your backyard, basement, or crawl space, we’ll help you manage the issue with top-of-the-line solutions.
All of our remedies are based on real science and local environmental challenges.
Other
It depends. If you are a homeowner, have an identified issue/assessment report, and reside within 15 miles of our office in Wall Township, we will be happy to review your case and provide a complimentary estimate! If we do end up charging for a site visit, we will credit that fee back once we are hired to complete the job within 90 days of our first estimate.
Tell us more about your situation! Our investigators would be happy to check their schedules and see if we can fit you in. Typically, our availability allows us to schedule investigations 4-6 days out and remediations 4-6 weeks out depending on the need.
Immunoglobulin G (IgG): This is the most common antibody. It's in the blood and other body fluids and protects against bacterial and viral infections. This test measures the amount of IgG antibodies in your bloodstream, and the presence of IgG suggests that the infection happened weeks to months in the past.
Both tests help determine the body’s immune response to mold exposure. The total IgE test measures the overall quantity of immunoglobulin E (antibodies) in the blood, not the amount of a specific type. It can be used to detect an allergic response in the body rather than a specific allergy. IgE shows the reaction from a recent exposure whereas IgG shows an exposure that happened weeks or months ago.
Ask nearly anyone, and you'll hear that bats (although beneficial in insect control) can be dangerous because they carry rabies. But a lesser-known danger, and one that is not as easy to avoid, is histoplasmosis.
It is an infectious disease caught by inhaling the spores of the histoplasmosis capsulation fungus. While it is not contagious, the disease can affect a wide variety of the population who may not even be aware they are at risk.
Anyone can get histoplasmosis. There are, however, certain people whose occupations make the risk of exposure greater than others. Included in that group are chimney cleaners, construction workers, gardeners, HVAC installers or repair people, roofers, and of course spelunkers (cave explorers). In reality, however, anyone who comes across the fungus can get histoplasmosis. 90% of people with bats in their homes have histoplasmosis and may have not been diagnosed properly.
A skin prick test, also called a puncture or scratch test, checks for immediate allergic reactions to substances like pollen, mold, pet dander, dust mites, and foods. Although it can be useful in identifying your body’s response to allergic reactions, it is not too helpful when it comes to Mold Illness health issues.
GreenWorks Environmental is Trusted & Certified
Our Building Biologists understand not only the science of the built environment but how it collides with the natural one.
Does Mold Have You Worried?
